Merchandise are based mostly on the highest quality composite fiberglass non conductive rod with polypropylene coating providing excessive sturdiness in harsh environments, permitting the contractors to derive significant benefit from their funding in the product.
(A)DUCT RODDERS & TRACEABLE DUCT RODDERS
Cable Jockey Mini Duct Rodder : Based on four.5mm (3/16 highest quality composite fiberglass non conductive rod with polypropylene coating available in 50m (165ft) & 80m (265ft) length options and perfect for pulling electric cables & wires, fiber optic cables & datacom cables in below flooring channels, multi-storey office complexes & long length industrial electric circuits.
Cable Plus Midi Duct Rodder : Primarily based on 6.7mm (1/4 highest quality composite fiberglass non conductive rod with polypropylene coating available upto 120m (395ft) size : for set up of signaling & communication cables, optical fiber cables, datacom cables in road lighting, campus installations, airports & industrial conduits.
Cable Tiger Maxi Duct Rodder : Primarily based on 9mm highest high quality composite fiberglass non conductive rod with polypropylene coating and ideally suited for set up of optical fiber telecom cables in buried/underground forty/32mm HDPE ducts upto 300meters. The cabletiger maxi duct rodder can be the most widely used tools in OFC maintenance & the place cable blowing methodology shouldn’t be feasible.
MTRAK Traceable Midi Duct Rodder : Based on 5.5mm highest quality composite rod with polypropylene coating with 3 x 0.5mm copper wires, based on slip ring design for continuous tracing, is designed around the necessity of the plumbing market and the data/smaller telecom contractors who would usually route hint (with or with out sonde) of buried/underground smaller dia pipes such as buried telecom & plumbing pipes in housing areas. The base of traceable rodder comprises a terminal box that gives 2 particular person terminal connections to the 2 inbuilt copper tracer wires of the traceable duct rodder.
After inserting the traceable rod into the pipe which is to be route traced, apply signal from the direct connection lead to a transmitter to a single terminal & connect the opposite lead of the transmitter to an earth stake which then excites the total size of the rodder to enable hint the buried pipes. If the output from the transmitter is applied to both terminals (direct connection lead hooked up to one terminal & earth lead to the opposite terminal), the front main tip of the rodder can be energized & will act very very similar to a sonde permitting the operator to localize the tip of the rodder & in turn any blockage points in the pipe. Use any Digital Pipe & cable locating receiver from above ground to hint the route of the pipe.
CTRAK Traceable Maxi Duct Rodder :‘CTRAK Maxi traceable duct rodder based mostly on 9mm composite rod with polypropylene coating with a in-built 1mm copper wire that is inflexible but versatile enough for tracing route of buried/underground non metallic telecom HDPE ducts or plastic pipes of 36mm dia or greater. It’s designed and manufactured optimized to the requirement of telco’s and telecom contractors and in addition water and safety outdoors plant installations for tracing route & blockages of buried non metallic and metallic ducts/ pipes. The base of the body contains a terminal box that gives a connection to the inbuilt copper tracer wire of the duct rod. After inserting the traceable rod into the duct which is to be route traced, apply sign from the direct connection result in a transmitter to the terminal and connect the opposite lead of the transmitter to an earth stake, which then excites the total length of the rodder to enable trace the buried pipes. Use any digital Pipe & cable locating receiver to trace the route of the buried pipe.
(B) PUSH PULL RODS & FISH TAPES
Cable Pro Push Pull Rod :
Primarily based on 6.7mm dia composite non-conductive fiberglass rod ideally suited for pushing / pulling cables/wires in wall recesses, false ceiling and beneath flooring channels. Available in four x 1mtr segmented lengths (professional equipment) with normal accessory set and 6 X 1mtr segmented length (Premium equipment) with a full accessory set. Connect as many rods collectively to realize size necessary.
No. Of Rods
Push Pull Rods Pro Set
four x 1mtr Rods (6.7mm dia)
Push Pull Rods Premium Set
6 x 1mtr Rods (6.7mm dia)
Push Pull Rods Premium Xtra Set
10 x 1mtr Rods (6.7mm dia)
1 x Massive Seize Hook, 1 x Pulling Eye & Ring, 1 x Pulling Eye, 1 x Spherical Bullet, 1 x Magnet, 1 x Flexiguide & 1 x Gender Changer
Push Pull Rods Compact Set
- four x zero.5mtr Rods (6.7mm dia)
- 1 x Large Seize Hook, 1 x Pulling Eye & Ring & 1 x Gender Changer
Cable Professional Accessory Set
1 x Pulling Eye & Ring, 1 x Pulling Eye, 1 x Spherical Bullet, 1 x Magnet, 1 x Flexiguide
Skilled Fish Tapes :
Based on 3mm dia composite non-conductive fiberglass rods is designed and manufactured for pulling cables & wires such as electric, audio-visible, CATV, phone, datacom in new or populated conduits embedded in partitions, cellings & floors. This is right for direct pulls of 20m & above. The glass rod is highly resilient to bending and shearing stresses, permitting it to turn in small radiuses.