Jameson Duct Rodders

Jameson produces better fiberglass duct rodders and conduit rodders from over 25 years of expertise and offering essentially the most complete range of fish tapes, duct rodders and locatable conduit rodders available together with: 1/8″ to 1/2″ diameter and 50′ to one thousand’ in size. Each duct rodder is obtainable unmarked, 5 feet interval marks or with metric markings.

project_report_bulgaria_mall_Join a conduit and pipe locator sonde to one of many Jameson or Radiodetection conduit and conduit rodders to find exact locations within ducts, pipes and conduits.

The Jameson Duct Hunters or Radiodetection duct rodders or locatable conduit rodders includes a copper conductor within the complete length for straightforward locating of the conduit / duct in a single straightforward step or duct

Jameson Rodders

Square Rod

Wee Buddy Duct Rodder

Conduit Measurement: 1/2″ and up
Bend Radius: 1.5″
Lengths Available: 50′ – a hundred and fifty’
Rodder Dia.: 1/eight”
Pull Strength: 200 lbs.
Makes use of: Inside wiring in occupied conduit
Accessory Package: Small leader, massive leader, 2 pulling eyes, 2 splice ferrules, 2 end ferrules, adhesive, emery cloth, plastic case

Little Buddy Conduit Rodder

Conduit Measurement: Three/4″ – 1 1/2″
Bend Radius: 2″
Lengths Available: One hundred fifty’ – 300′
Rodder Dia.: Three/sixteen”
Pull Strength: 200 lbs.
Makes use of: Inside, outside conduit drops
Accessory Package: 2 pulling eyes, 2 leaders, splice ferrule, 2 finish ferrules, adhesive, emery cloth, canvas pouch

Easy Buddy Conduit Rodder

Conduit Size: 1″ – 2″
Bend Radius: 7″
Lengths Out there: 300′ – 400′
Rodder Dia.: 1/four”
Pull Power: 400 lbs.
Uses: Conduit in buildings
Accessory Kit: Pulling eyes, splice ferrule, finish ferrule, adhesive, emery cloth, canvas pouch

Good Buddy

Conduit Dimension: 2″ – four”
Bend Radius: 7″
Lengths Available: 300′ – 400′
Rodder Dia.: Three/8″
Pull Energy: One thousand lbs.
Uses: Confined areas: MH-riser, riser-riser, cable vaults
Accessory Package: Splice ferrule, end ferrule, adhesive, emery cloth, canvas pouch

Good Buddy II

Conduit Measurement: 2″ – 4″
Bend Radius: 7″
Lengths Out there: 400′ – 600′
Rodder Dia.: Three/eight”
Pull Power: One thousand lbs.
Makes use of: Longer runs: MH-riser, riser-riser, cable vaults
Accessory Equipment: Splice ferrule, finish ferrule, adhesive, emery cloth, canvas pouch

Good Buddy III

Conduit Measurement: 2″ – four”
Bend Radius: 7″
Lengths Obtainable: 300′ – 400′
Rodder Dia.: Three/eight”
Pull Energy: A thousand lbs.
Makes use of: Max portability: MH-riser, riser-riser, cable vaults
Accessory Equipment: Splice ferrule, finish ferrule, adhesive, emery cloth, canvas pouch

Big Buddy

Conduit Dimension: 4″ and up
Bend Radius: 10″
Lengths Accessible: Four hundred’ – 1000′
Rodder Dia.: 1/2″
Pull Power: 1400 lbs.

Makes use of: MH to MH, lengthy conduit runs
Accessory Equipment: 2 splice ferrule, end ferrule, adhesive, emery cloth, canvas pouch

Radiodetection Flex Rods

Rodders attach to locator sondes to push and pull sondes via conduits and pipes to precisely the position and depth with Underground Utility Locators. Flex Rods are constructed of a durable glass fiber rod in a polypropylene sleeve. Resistant to abrasion, most solvents, oils and acids, Flex Rods can be used with all Radiodetectionpipe locator sondes with M10 threaded ends. Out there rod lengths vary from 98 ft.

Leave a Reply

Your email address will not be published. Required fields are marked *