12 mm Fiberglass Conduit Rodders | Duct Rodder

Fiberglass Conduit Rodders also was called fiberglass push pull rod, conduit rod, duct rodder, duct rodding,duct rod, snake duct rod, conduit duct rod, etc. It is composed of fiberglass rod which is extruded by fiber glass rod and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It is covered imported ABS engineering plastic as it protect layer, which make Fiberglass conduit rodder cover sliding on the surface, durable, corrosion resistant and has good insulation performance. Which make them safe for use in cable pulling in the conduit. Fiberglass conduit rodder will equipped with different size reel according to the length of rod. There are wheels on the reel, which could make it easy to move. 

12 mm Fiberglass Conduit Rodders | Duct Rodder Technical Data and Specification:

Product Name 12 mm Fiberglass Conduit Rodders | Duct Rodder
Material Epoxy Resin with glass fiber (inner core) and imported ABS (out layer)
Parameter Reinforcement E-Glass Fiber
Glass content of inner part 80-85%
Density >1.8 g/m³
Diameter tolerance ±0.10 mm
Work situation temperature -40°C ~ +80°C
Min pulling strength 4000 N ± 5%
Tensile modulus >30000 MPa
Consistency of rod 150 g ± 5%
Flexibility modulus >30000 MPa
Elongation at Break 2.5-3%
Rod Diameter Rod Length Steel Frame Size (H*L*W) Unit Weight Notice
12 MM 100 M 1.2*1.2*0.4 M 65 KGS Color can be made of orange, yellow, blue, black, white, red etc.
12 MM 150 M 1.2*1.2*0.4 M 80 KGS
12 MM 200 M 1.2*1.2*0.5 M 95 KGS
12 MM 250 M 1.3*1.2*0.5 M 110 KGS
12 MM 300 M 1.4*1.2*0.5 M 130 KGS

12 mm Fiberglass Conduit Rodders | Duct Rodder Package: 12mm duct rodder2

12mm Fiberglass Conduit Rodders | Duct Rodder Application: Because of the extreme flexibility, it can be used for Telecommunications, electrician and others department which use HDPE pipes, cable, the cable specific tapes as push-pull tools.
 

Leave a Reply

Your email address will not be published. Required fields are marked *